Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Viewed products
-
GOLDO® LT1 TREMOLO CHROME
Licensed by Duesenberg - Mounted in...
GOLDO® LT1 TREMOLO CHROME
105,00 €tax incl.
(recommended public price)
TLT1C
·Supplied with US and Metric Studs
·Studs Spacing : 81.5mm
Licensed by Duesenberg®
Can simply be swapped for a stop tailpiece.
No drilling, no milling necessary.
The tremolo is attached to the two threaded tailpiece bushings with the supplied screws.
The round arm can be adjusted in angle and length to easily find the preferred personal setting.
Incl. metric and US screws, matching hex keys and an 8mm open-end wrench for the tremolo arm nut.
The distance between the tailpiece studs should be 81.5 mm, measured from center to center.
SCHALLER® STM ROLLER BRIDGE WITH...
SCHALLER® STM ROLLER BRIDGE WITH ADJUSTABLE SPACING CHROME
TONEPROS® TUNEOMATIC BRIDGE 4mm POSTS...
TonePros TP6R provides superior performance on all Bigsby-style tremolo equipped guitars. The TonePros design roller saddles are engineered to allow the strings to roll smoothly, while the TonePros patented system locks the bridge solidly in place allowing for the strings to always return exactly in tune when trem’ed. Bigsby and other tremolo users will...
TONEPROS® TUNEOMATIC BRIDGE 6mm POSTS...
The TonePros TPFR is a locking Nashville style bridge with flat head saddle adjustment screws, TonePros “Roller” saddles, large posts, and metric thread. The TonePros design roller saddles are engineered to allow the strings to roll smoothly, while the TonePros patented system locks the bridge solidly in place allowing for the strings to always return...
GOLDO® ROLLER BRIDGE BRASS SADDLES M4...
Especially in combination with tremolo systems, a roller bridge can be worth its weight in gold, as it significantly reduces the risk of possible detuning. The göldo Turnómatic roller bridge comes in a classic vintage design, and the string saddles are provided with small brass rollers over which the strings run. The knurled washers for height adjustment...
TUNE-O-MATIC ROLLER BRIDGE METRIC CHROME
"TURNOMATIC" 51mm E-E ROLLER BRIDGE CHROME
30 other products in the same category:
DUESENBERG® LONG TREMOLO DIAMOND DELUXE GOLD
TDBLG
*DUESENBERG LONG TREMOLO GOLD
GOLDO® G5 SHORT TREMOLO NICKEL
TGD5N
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G5 SHORT TREMOLO GOLD
TGD5G
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G5 SHORT TREMOLO POLISHED ALUMINIUM
TGD5A
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G7 LONG TREMOLO NICKEL
TGD7N
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G7 LONG TREMOLO POLISHED ALUMINIUM
TGD7A
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
DUESENBERG® LONG TREMOLO RADIATOR POLISHED ALUMINIUM
TDRLA
*DUESENBERG RADIATOR TREMOLO LONG ALU
DUESENBERG® LONG TREMOLO DIAMOND DELUXE POLISHED ALUMINIUM
TDBLA
DUESENBERG LONG TREMOLO ALU
DUESENBERG® SHORT TREMOLO DIAMOND DELUXE POLISHED ALUMINIUM
TDBSA
*DUESENBERG DIAMOND DELUXE TREMOLO ALU SHORT (FIT MPTM5)
GOLDO® LT1 TREMOLO FOR NICKEL
TLT1N
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT1 TREMOLO GOLD
TLT1G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT2 TREMOLO NICKEL
TLT2N
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® LT2 TREMOLO FOR LES PAUL® GOLD
TLT2G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® LT2 TREMOLO CHROME
TLT2C
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® DG TREMOLO FOR JAZZMASTER® OR JAGUAR® NICKEL / CHROME
TDG1JM
The göldo tremolo for offset guitars is not a copy of the Fender® system, but can replace it without milling, drilling and modifications. It offers all the advantages of the new göldo DG1 tremolo series: butter-smooth movement in "up & down" operation and an in all dimensions settable and elegantly shaped tremolo arm with safe, adjustable zero point....
GOLDO® DG TREMOLO SHORTY DESIGN NICKEL
TDG1ST
DG tremolo system in an ultra-small design and all the advantages of the göldo DG series: butter-smooth operation in "up & down" modes and an elegantly shaped round tremolo arm with safe, settable zero point, adjustable in all dimensions. A true alternative! Including the screws for mounting the base plate. With round tremolo arm. Required routing...
GOLDO® DG SHORT TREMOLO HOLLOWBODY GUITAR NICKEL
TDG1HS
DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...
GOLDO® DG LONG TREMOLO HOLLOWBODY GUITAR NICKEL
TDG1HL
DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...
GOLDO® LT1 TREMOLO SATIN CHROME
TLT1S
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT1 TREMOLO BLACK
TLT1B
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® G5 SHORT TREMOLO BLACK
TGD5B
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® DOWNHOLDER STRINGS ANGLE ADJUSTER FOR BIGSBY® TYPE TREMOLO NICKEL
TGDDH
GOLDO DOWNHOLDER NICKEL RETROFIT FOR BIGSBY TYPE TREMOLO (METRIC & US STUDS)
DUESENBERG® LONG TREMOLO DIAMOND DELUXE LEFT HAND NICKEL
TDBLLN
*DUESENBERG LONG TREMOLO NICKEL LEFT HAND
DUESENBERG® LONG TREMOLO RADIATOR LEFT HAND GOLD
TDRLLG
*DUESENBERG RADIATOR TREMOLO LONG GOLD LEFT HAND
DUESENBERG® LONG TREMOLO RADIATOR LEFT HAND NICKEL
TDRLLN
*DUESENBERG RADIATOR TREMOLO LONG NICKEL LEFT HAND
DUESENBERG® LES TREM II TREMOLO FOR LEFT HAND NICKEL
TM85LN
DUESENBERG "LESTREM II " TREMOLO NICKEL LEFT HAND
DUESENBERG® LES TREM II TREMOLO FOR LEFT HAND GOLD
TM85LG
DUESENBERG "LESTREM II " TREMOLO GOLD LEFT HAND
DUESENBERG® LONG TREMOLO RADIATOR LEFT HAND POLISHED ALUMINIUM
TDRLLA
*DUESENBERG RADIATOR TREMOLO LONG ALU LEFT HAND
DUESENBERG® SHORT TREMOLO DIAMOND DELUXE LEFT HAND NICKEL
TDBSLN
*DUESENBERG DIAMOND DELUXE TREMOLO NICKEL SHORT LEFT HAND
GOLDO® LT1 TREMOLO FOR LEFT HAND GOLD
TLT1LG
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
