HOSCO® FRET-END DRESSING FILE FOR JUMBO FRETS

SUMMIT® STRAIGHT OVERHANG FRET-END CUTTER

SUM8001

SUMMIT STRAIGHT OVERHANG FRET-END CUTTER SUMMIT frettes cutter pour bord de touche.

SUMMIT® FRET CUTTER WITH HAMMER

SUM8004

SUMMIT fret cutter with hammer SUMMIT frettes cutter avec marteau

SUMMIT® BASIC SET CAULS FOR PRESS-DEVICE (item: 8009 or 8010)

SUM80101

SUMMIT BASIC SET CAULS FOR PRESS-DEVICE (item: 8009 or 8010) flat, 7.1/4'", 12",16" SUMMIT, lot de câles à radius pour presse (article 8009 ou 8010) flat, 7.1/4'", 12",16"

SUMMIT® CAUL 20" FOR PRESS-DEVICE (item: 8009 or 8010)

SUM80109

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 20" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 20"

SUMMIT® CAUL 14" FOR PRESS-DEVICE (item: 8009 or 8010)

SUM80107

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 14" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 14"

SUMMIT® CAUL 9,5" FOR PRESS-DEVICE (item: 8009 or 8010)

SUM80104

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 9,5" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 9,5"

SUMMIT® CAUL 10" FOR PRESS-DEVICE (item: 8009 or 8010)

SUM80105

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 10" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 10"

FRATERMUSIC® NOTCHED STRAIGHT EDGE FOR STRAT®/TELE®/LESPAUL® (24.75" + 25.5")

NS-EDGE

FRATER® NOTCHED STRAIGHT EDGE FOR STRAT®/TELE®/LESPAUL® (24.75" + 25.5")

SUMMIT® FRET BEVELING FILE (works with item: 8067)

SUM8068

SUMMIT FRET BEVELING FILE (works with item: 8067)

SUMMIT® HANDLE FRET BEVELER DOUBLE ANGLED 35°/90° WITHOUT FILE (NEEDS SUM8068)

SUM8067

SUMMIT HANDLE FRET BEVELER DOUBLE ANGLED 35°/90° WITHOUT FILE (NEED SUM8068)

SUMMIT® TEFLON TAPE-FRET PROTECTIVE, 5 METERS

SUM8064

SUMMIT TEFLON TAPE-FRET PROTECTIVE, 5 METERS

HOSCO® FRET LEVELING FILE (160 x 28 x 5mm)

TL-FL160S

HOSCO FRET LEVELING FILE (160 x 28 x 5mm)

FRATERMUSIC® NOTCHED STRAIGHT EDGE FOR BASS (34"+35")

NS-EDGE-BASS

FRATER NOTCHED STRAIGHT EDGE FOR BASS (34"+35")

HOSCO® WOOD RADIUS SANDING BEAM 15" AND 20" (84 x 150mm)

TWSB-4

RADIUS BLOCK 84 x 150mm RADIUS 15" & 20"

HOSCO® FRET TANG NIPPER FOR MEDIUM FRETS

H-FTN-M

HOSCO® FRET TANG NIPPER FOR MEDIUM FRETS LENGTH : 170mm WEIGHT : 250g DOES NOT CUT STAINLESS STEEL FRETS

HOSCO® COMPACT FRET CROWN FILE WITH COARSE / FINE CUTS FOR JUMBO FRETS (3mm)

H-FF3

HOSCO® COMPACT FRET CROWN FILE WITH COARSE AND FINE CUTS FOR JUMBO FRETS (3mm) -File size : 100 x 20 x 4mm (without silicone rubber grip) -Embossed triangle marks shows coarse-cut and fine-cut sides -Red silicon rubber grip

HOSCO® COMPACT FRET CROWN FILE WITH COARSE / FINE CUTS FOR MEDIUM FRETS (2mm)

H-FF2

HOSCO® COMPACT FRET CROWN FILE WITH COARSE AND FINE CUTS FOR MEDIUM FRETS (2mm) -File size : 100 x 20 x 4mm (without silicone rubber grip) -Embossed triangle marks shows coarse-cut and fine-cut sides -Yellow silicon rubber grip

HOSCO® COMPACT FRET CROWN FILE WITH COARSE / FINE CUTS FOR SMALL FRETS (1mm)

H-FF1

HOSCO® COMPACT FRET CROWN FILE WITH COARSE AND FINE CUTS FOR SMALL FRETS (1mm) -File size : 100 x 20 x 4mm (without silicone rubber grip) -Embossed triangle marks shows coarse-cut and fine-cut sides -Blue silicon rubber grip

HOSCO® KEIBA® FRET CUTTER FOR STAINLESS STEEL 210 x 16mm

TL-FC28S

KEIBA® FRET CUTTER FOR STAINLESS STEEL

SUMMIT® ALUMINIUM FRET LEVELER 600mm

SUM8043

SUMMIT ALUMINIUM FRET LEVELER 600mm Technical data - Length 600 mm - Precise fingerboard sanding and fret leveling - From hardened anodized aluminum alloy Advantages - Beveled edges under 45° to assure equal sanding over the flat working surface. - Ends closed with rubbered plastic covers to prevent damage from tool ends - Keep sanding resin from entering...

SUMMIT® ALUMINIUM FRET LEVELER 400mm

SUM8042

SUMMIT ALUMINIUM FRET LEVELER 400mm Technical data - Length 400 mm - Precise fingerboard sanding and fret leveling - From hardened anodized aluminum alloy Advantages - Beveled edges under 45° to assure equal sanding over the flat working surface. - Ends closed with rubbered plastic covers to prevent damage from tool ends - Keep sanding resin from entering...

SUMMIT® FRET HAMMER

SUM801327

Technical data - Diameter 27 mm, weight 0,22 kg - Double surface white softer material - Yellow harder material Advantages - Double-functional: combination of hard and flexible surface - For standard installing and partial harder hammering, when needed

SUMMIT® HEIGHT FRET DETECTOR - HFD

SUM8046

Technical data -Stainless steel 1,5mm thick - Dim100x52x1,5mm. Advantages - Two in one: high fret detector + action gauge - Handy reference: actions for electric, classical, acoustic and bass guitars - Hole for easy storage.

THOMAS FLINN® PAX FRET SLOT SAW 0.53mm

TF-PGUI

G&W 2 SIDED LEVELING FILE 70mm

GW-1141070

G&W 2 SIDED LEVELING FILE 100mm

GW-1141100