DUESENBERG® MACHINE HEADS 6x1 Z-TUNERS MICRO 1:18 NICKEL

DUESENBERG® MACHINE HEADS 6x1 Z-TUNERS MICRO 1:18 NICKEL

·For 6x1 headstocks
·Gear ratio 1:18
·For 10mm pegholes
·Incl. bushings and screws

Instead of regular pegs, these are fitted with knurled slim shafts which allow for a very space-saving installation. The exact position and orientation on the headstock is fixed through two little pegs on the backside of the tuner.

The Duesenberg Z-Tuner is a smooth, closed type tuner for 10mm drillings featuring a 1:18 ratio. But what's really special about our Z-Tuners is the drilled tuner shaft which allows you to hide sharp string ends inside the tuner. Simply cut off the string as usual, put the end vertically inside the shaft and start tuning - done. No more string ends damaging your case, bag or fingertips.