Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Viewed products
CABLE STRIPPER PLIERS
47,00 €tax incl.
(recommended public price)
STRIPPER
·Suitable for Plastic-coated cables, Rubber-coated cables
·Operating range (diameter) 5 mm (max)
·Working area (cross section) 10 mm² (max)
·Operating range (AWG diameter) 7 awg (max)
·Material Tool steel
·Material properties tempered
·Length 160 mm
·Weight 131 g
SOLDERING WIRE 1mm DIA LEAD 40%, TIN 60%...
Température de soudage peu élevée du fait de la fusion rapide du métal d'apport - Les résidus de flux peuvent avoir une action corrosive - Fil de brasage tendre actif contenant des halogènes S-Sn60Pb40 conforme à la norme DIN EN ISO 9453. Flux conforme à la norme DIN EN 29454-1/1.1.2.B
SOLDERING WIRE Ø 1mm LEAD 40%, TIN 60%...
Fil de soudure RA avec 5 âmes en colophane activées et flux F-SW 26 de 2,5 % Propriétés d'humidification et d'étalement supérieures, également disponibles pour les soudages difficiles au sein d'applications d'ingénierie électrique et électronique Alliages haute pureté pour joints de soudure fiables
UNSOLDERING BRAID 1.6m / 2.5mm
3RD HAND SOLDERING TOOL WITH MAGNIFYING GLASS
3RD HAND SOLDERING TOOL WITH MAGNIFYING GLASS
16 other products in the same category:
SINTOMS® FRET TANG NIPPER
LT-923
SINTOMS® TANG NIPPER (FOR ALL TYPE OF FRETS)
HOSCO® FRET PULLER
TL-TC10
PINCE TETE PLATE (TO PULL OUT FRETS)
HOSCO® FLUSH FRET CUTTER FOR NICKEL SILVER FRETS 190mm x 26mm
TL-FC190
HOSCO FRET CUTTER (NOT FOR STAINLESS STEEL) 190mm LONG x 26 mm WIDTH
SUMMIT® FRET-END CUTTER WITH ANGLED HANDLE
SUM8003
Made to handle all fret wires including Stainless Steel. The offset handles give clearance when nipping fret ends when the neck is resting on a bench 45. Long handles provide the power to cut jumbo wire. The handles are sprung so they re-open on release.
SUMMIT GUIDE GLIDE- PROFILES 5-6 FOR TANG CUTTER (need item 8000)
SUM80003
SUMMIT GUIDE GLIDE- PROFILES 5-6 FOR TANG CUTTER (need item 8000) SUMMIT fret tang cutter guiding plate - profiles 5-6,suitable for fret's dimensions: A(width) B(hight) 5 2,50 1,20 6 2,99 1,47
SUMMIT GUIDE GLIDE- PROFILES 3-4 FOR TANG CUTTER (need item 8000)
SUM80002
SUMMIT GUIDE GLIDE- PROFILES 3-4 FOR TANG CUTTER (need item 8000) SUMMIT fret tang cutter guiding plate - profiles 3-4, suitable for fret's dimensions: A(width) B(hight) 3 2,30 1,40 4 2,80 1,45
SUMMIT® FRET TANG CUTTER UNIVERSAL - ADJUSTABLE
SUM8000
SUMMIT FRET TANG CUTTER UNIVERSAL - ADJUSTABLE SUMMIT cutter pour pied de frettes adjustable
SUMMIT® ERGONOMIC FRET PULLER
SUM8002
SUMMIT ERGONOMIC FRET PULLER SUMMIT pince pour enlever les frettes
SUMMIT® STRAIGHT OVERHANG FRET-END CUTTER
SUM8001
SUMMIT STRAIGHT OVERHANG FRET-END CUTTER SUMMIT frettes cutter pour bord de touche.
SUMMIT® FRET CUTTER WITH HAMMER
SUM8004
SUMMIT fret cutter with hammer SUMMIT frettes cutter avec marteau
SUMMIT® FRET PRESS PLIERS (basic set cauls included)
SUM8010
SUMMIT ERGONOMIC FAST FRET PRESS PLIERS SUMMIT pince pour fretter
HOSCO® FRET TANG NIPPER FOR MEDIUM FRETS
H-FTN-M
HOSCO® FRET TANG NIPPER FOR MEDIUM FRETS LENGTH : 170mm WEIGHT : 250g DOES NOT CUT STAINLESS STEEL FRETS
HOSCO® KEIBA® FRET CUTTER FOR STAINLESS STEEL 210 x 16mm
TL-FC28S
KEIBA® FRET CUTTER FOR STAINLESS STEEL
STRING CUTTING NIPPERS
ST-CUT
·Longueur: 115 mm ·Matériau: Acier carbone ·Dureté de coupe: 60 HRC ·Valeur de coupe (max.) pour fil souple: 2 mm ·Modèle: Pince de prédécoupe ESD ·Type de produit: Pince coupante frontale
!! DISCONTINUED !! JP FARLEY® GUITAR TOOL WITH CASE
LT-4232-000
8 X 1 GUITAR TOOL MADE IN USA
