EVERTUNE® G MODEL TEMPLATES

199,00 €tax incl.
(recommended public price)

In Stock

Reference: ET-TEMPLATE-G

EVERTUNE® G MODEL TEMPLATES

·Includes plastic templates and all hardware.
·The guitar body has to be 2.1” to do a standard G model installation where you recess the two back plate covers on the back of the guitar.
·Any guitar that requires a G model bridge with a body thickness of less than 2.1” will be a route through body installation and will require a F or T model back plate to cover the route pocket on the back. We recommend the T back plate for route through body installations due to the smaller footprint.
·To recess the footplate, the guitar body has to be at least 1 7/8” in order not to have to use a custom back plate riser.
·Any guitar body thickness less than 1 3/4” will require the foot plate to be installed on top of a custom back plate riser to ensure proper positioning of the modules.

Accessories

You must be logged

EVERTUNE® BRIDGE G MODEL 6 STRINGS CHROME

EVERTUNE BRIDGE G MODEL 6 STRINGS CHROME For Gibson-style guitars. Ambidextrous. Every new EverTune bridge comes with a service pack. This includes an EverTune hex key (matched to the faceplate color), an extra set of action screws and a printed Owners Manual. If the installed set of action screws is 8mm then the service pack will have 10mm screws; if the...

432,00 € (recommended public price)

Add to cart

Quick view More

You must be logged

EVERTUNE® BRIDGE G MODEL 6 STRINGS NICKEL

EVERTUNE BRIDGE G MODEL 6 STRINGS NICKEL For Gibson-style guitars. Ambidextrous. Every new EverTune bridge comes with a service pack. This includes an EverTune hex key (matched to the faceplate color), an extra set of action screws and a printed Owners Manual. If the installed set of action screws is 8mm then the service pack will have 10mm screws; if the...

432,00 € (recommended public price)

Add to cart

Quick view More

30 other products in the same category:

You must be logged

In Stock

WD MUSIC® BIT FOR BINDINGS 1/16 inch CHANNEL CUT

BINDING BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is a high quality carbide bit designed to cut a 1/16 in. binding channel on the tops and backs of guitars. Bit diameter = 0.55in (14mm ) Bit shaft diameter = 1/4 in. Length of bit excluding shaft = 1.10 in. (28mm)

52,80 € (recommended public price)

You must be logged

In Stock

GOLDO® TRIPLE EDGE COUNTERSINK 10mm

WS10S

TRIPLE EDGE COUNTERSINK (10mm)

23,88 € (recommended public price)

You must be logged

In Stock

GOLDO® TRIPLE EDGE COUNTERSINK 8.3mm

WS83S

TRIPLE EDGE COUNTERSINK (8,3mm)

19,80 € (recommended public price)

You must be logged

In Stock

GOLDO® TRIPLE EDGE COUNTERSINK 6.3mm

WS63S

TRIPLE EDGE COUNTERSINK (6,3mm)

20,28 € (recommended public price)

You must be logged

In Stock

FRATERMUSIC® ROUTING TEMPLATE LEVER SWITCH

RTT10

FRATER ROUTING TEMPLATE LEVER SWITCH

14,40 € (recommended public price)

You must be logged

In resupplying

FRATERMUSIC® ROUTING TEMPLATE PRECISION® PICKUP

RTT06

FRATER ROUTING TEMPLATE PRECISION PICKUP

14,40 € (recommended public price)

You must be logged

In resupplying

FRATERMUSIC® ROUTING TEMPLATE P90 PICKUP

RTT05

FRATER ROUTING TEMPLATE P90 PICKUP

14,40 € (recommended public price)

You must be logged

In Stock

FRATERMUSIC® ROUTING TEMPLATE TELE® NECK PICKUP FOR PICKGUARDS

RTT03

FRATER ROUTING TEMPLATE TELE NECK PICKUP FOR PICKGUARDS

14,40 € (recommended public price)

You must be logged

In resupplying

FRATERMUSIC® BUSHING TEMPLATE E- E 52mm

BUSH-TEMP52

FRATER BUSHING TEMPLATE E/A 52mm

14,40 € (recommended public price)

HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)

You must be logged

Special order only

HOSCO® 2 STEP DRILL BIT 7.8mm / 9.9mm HSS FOR MODERN MACHINE HEADS

TL-DB2-7899

HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)

144,00 € (recommended public price)

CARBIDE ROUTER BIT 3/8 IN WIDTH 3/4 IN DEPTH FOR TEMPLATES

You must be logged

In Stock

WD MUSIC® BIT FOR TEMPLATES 3/4 inch DEPTH

BIT-3/8-OD

This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.

78,00 € (recommended public price)