Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Viewed products
-
FRATERMUSIC® ROUTING...
FRATER ROUTING TEMPLATE JASS BASS...
-
BRIDGE PINS BONE FOR...
BONE BRIDGE PINS 5.1mm WITH EBONY DOT...
FRATERMUSIC® ROUTING TEMPLATE JASS BASS® NECK PICKUP
RTT08
12,00 €tax incl.
(recommended public price)
WD MUSIC® BIT FOR TEMPLATES 1/2 inch DEPTH
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2" per pass. Bit shaft diameter = 1/4 in.
WD MUSIC® BIT FOR TEMPLATES 3/4 inch DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.
WD MUSIC® BIT FOR TEMPLATES 3/8 inch DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.
WD MUSIC® BIT FOR TEMPLATES 1/2 inch DEPTH
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2" per pass. Bit shaft diameter = 1/4 in.
WD MUSIC® BIT FOR TEMPLATES 3/4 inch DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.
WD MUSIC® BIT FOR TEMPLATES 3/8 inch DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.
WD MUSIC® BIT FOR TEMPLATES 1/2 inch DEPTH
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2" per pass. Bit shaft diameter = 1/4 in.
WD MUSIC® BIT FOR TEMPLATES 3/4 inch DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.
WD MUSIC® BIT FOR TEMPLATES 3/8 inch DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.
30 other products in the same category:
G&W PRECISION DREMEL® ROUTING BASE
GW-EG20
RIVIERA® HEADLESS SINGLE BASS BRIDGE TEMPLATE
RBBS-T
RIVIERA® GUITAR TREMOLO TEMPLATE
RTS10-T
GÖLDO® TRIPLE EDGE COUNTERSINK 10mm
WS10S
TRIPLE EDGE COUNTERSINK (10mm)
GÖLDO® TRIPLE EDGE COUNTERSINK 8.3mm
WS83S
TRIPLE EDGE COUNTERSINK (8,3mm)
GÖLDO® TRIPLE EDGE COUNTERSINK 6.3mm
WS63S
TRIPLE EDGE COUNTERSINK (6,3mm)
FRATERMUSIC® ROUTING TEMPLATE LEVER SWITCH
RTT10
FRATER ROUTING TEMPLATE LEVER SWITCH
FRATERMUSIC® ROUTING TEMPLATE PRECISION® PICKUP
RTT06
FRATER ROUTING TEMPLATE PRECISION PICKUP
FRATERMUSIC® ROUTING TEMPLATE P90 PICKUP
RTT05
FRATER ROUTING TEMPLATE P90 PICKUP
FRATERMUSIC® ROUTING TEMPLATE TELE® NECK PICKUP FOR PICKGUARDS
RTT03
FRATER ROUTING TEMPLATE TELE NECK PICKUP FOR PICKGUARDS
FRATERMUSIC® BUSHING TEMPLATE E- E 52mm
BUSH-TEMP52
FRATER BUSHING TEMPLATE E/A 52mm
HOSCO® 2 STEP DRILL BIT 7.8mm / 9.9mm HSS FOR MODERN MACHINE HEADS
TL-DB2-7899
HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)
WD MUSIC® BIT FOR TEMPLATES 3/4 inch DEPTH
BIT-3/8-OD
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.
FRATERMUSIC® ROUTING TEMPLATE JASS BASS® BRIDGE PICKUP
RTT07
FRATER ROUTING TEMPLATE JASS BASS BRIDGE PICKUP
FRATERMUSIC® ROUTING TEMPLATE SINGLECOIL PICKUP
RTT11
FRATER ROUTING TEMPLATE SINGLE STRAT PICKUP
FRATERMUSIC® ROUTING TEMPLATE MUSICMAN® PICKUP
RTT13
FRATER ROUTING TEMPLATE MUSICMAN PICKUP
FRATERMUSIC® ROUTING TEMPLATE TELE BRIDGE PICKUP
RTT04
FRATER ROUTING TEMPLATE TELE BRIDGE PICKUP
FRATERMUSIC® ROUTING TEMPLATE TV JONES® PICKUP
RTT12
FRATER ROUTING TEMPLATE TV JONES PICKUP
FRATERMUSIC® BUSHING TEMPLATE E- A 54mm
BUSH-TEMP54
FRATER BUSHING TEMPLATE E/A 54mm
FRATERMUSIC® ROUTING TEMPLATE TELE® CAVITY CONTROL
RTT14
FRATER ROUTING TEMPLATE TELE CAVITY CONTROL
WD MUSIC® BIT FOR TEMPLATES 3/8 inch DEPTH
BIT-3/8
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.
FRATERMUSIC® FRONT AND BACK ROUTING TEMPLATE FLOYDROSE©
RTT15
FRATER ROUTING TEMPLATE FLOYD ROSE© (2 PIECES)
FRATERMUSIC® ROUTING TEMPLATE HUMBUCKER PICKGARDS
RTT16
FRATER ROUTING TEMPLATE HUMBUCKER PICKGARDS
ALL PARTS® TAPERED REAMER FOR BASS MACHINE HEADS 6.33mm TO 22.65mm
LT-0825-000
G&W TUNER HOLE CARBIDE COUNTERSINK
GW-TH-CC
G&W COLLET CHUCK ADAPTER FOR ROUTER 8mm TO 6.35mm
GW-CH1-8-6.35
G&W TUNER DRILLING JIG FOR ELECTRIC 6x1
GW-TDJ1
G&W TUNER DRILLING JIG FOR ACOUSTIC
GW-TDJ-A
G&W TUNER DRILLING JIG FOR CLASSICAL
GW-TDJ-C
G&W ULTIMATE TUNER PIN LOCATOR
GW-UTPL
G&W PRECISION DREMEL® ROUTING BASE
GW-EG20
RIVIERA® HEADLESS SINGLE BASS BRIDGE TEMPLATE
RBBS-T
RIVIERA® GUITAR TREMOLO TEMPLATE
RTS10-T
GÖLDO® TRIPLE EDGE COUNTERSINK 10mm
WS10S
TRIPLE EDGE COUNTERSINK (10mm)
GÖLDO® TRIPLE EDGE COUNTERSINK 8.3mm
WS83S
TRIPLE EDGE COUNTERSINK (8,3mm)
GÖLDO® TRIPLE EDGE COUNTERSINK 6.3mm
WS63S
TRIPLE EDGE COUNTERSINK (6,3mm)
