Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Corps
- Boutons de commande
- Chevalets & vibratos
- Contrôles & Sélecteurs
- Mécaniques
- Divers
- Visserie
- Manches
- Plaques de protection & plaques arrières
- Capots micros & kits
- Micros & préamplis
- Plaques & capots métal
- Attaches-courroie & security locks
- Guide cordes & sillets
- Manettes de vibrato
- Accessoires
- Pièces d'ampli
- Duesenberg®
- Sandberg®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Déjà vus
-
GHS® CORDES BASSE...
045 - 063 - 084 - 106 / 36" Length...
GHS® CORDES BASSE DOUBLE BOULES 045-106
43,80 €TTC
(prix public conseillé)
5630
045 - 063 - 084 - 106 / 36" (914.4 mm)
Lorsque vous ne voulez pas simplement « vous asseoir dans le mix » mais vous frayer un chemin à travers celui-ci, regardez les GHS Super Steels ! Le revêtement en acier inoxydable enroulé sur un fil à âme hexagonale apporte un son brillant et vif à votre basse, sans harmoniques perçantes ou stridentes. Les graves sont fortes et bien définies, jusqu'à la corde de Si grave, donnant à votre basse une clarté inégalée.
Parfaits pour les slappers, les Super Steel fonctionnent dans presque toutes les situations où vous souhaitez un son brillant et solide qui dure très longtemps.
VEUILLEZ NOTER! Bien que ces cordes soient conçues pour s'adapter aux basses Steinberger et aux instruments sous licence Steinberger, il existe certaines variations entre ce qui a été fabriqué dans le passé et ce qui est fabriqué actuellement. Il est impératif que vous vérifiiez la longueur des cordes actuellement sur votre basse pour vous assurer que notre longueur de 36" (de l'intérieur de l'extrémité de la boule à l'intérieur de l'extrémité de la boule) conviendra à votre instrument.
GHS® FAST FRET™
The ORIGINAL string cleaner! Not a spray! Contains no silicone. Apply to your strings and fingerboard to remove built up dirt and grime. Fast Fret keeps the strings sounding bright and new, extending the healthy lifetime of any strings.
MANIVELLE MÉCANIQUES BASSE LAITON / ÉBÈNE
MANIVELLE POUR MECANIQUES BASSE BOIS - LAITON / BASS STRING WINDER BRASS - HARDWOOD
PINCE COUPANTE POUR CORDES
·Length: 115 mm ·Material: Carbon steel ·Edge hardness: 60 HRC ·Wire hardness (max.) soft wire: 2 mm ·Type: ESD-Front cutter ·Type: Front cutter ·Product type: End cutting nippers
15 autres produits dans la même catégorie
GHS® PRECISION FLATS™ CORDES BASSE FILET...
3020
FB45 - FB60 - FB75 - FB95 / 32.75" Winding GHS Precision Flats™ Bass Strings deliver traditional deep percussive tone due to a unique cross-winding process. They are made with a highly magnetic stainless steel flat wrap for greater volume, longer durability and a smooth satin finish.
GHS® BASS BOOMERS™ CORDES BASSE MEDIUM...
ML3045
045 - 065 - 080 - 100 / 37.25" Winding GHS Bass Boomers® are one of the most popular bass strings in the world. Utilizing a nickel-plated steel wrap wire (with a special combination of stainless steel and nickel-plate on the low E and B strings) over a hex core, Bass Boomers® have a distinctive low-mid punch that sits well in any musical genre. This IS...
GHS® PRECISION FLATS™ CORDES BASSE (5...
M3050-5
FB45 - FB65 - FB85 - FB105 - FB126 / 37.25" Winding GHS Precision Flats™ Bass Strings deliver traditional deep percussive tone due to a unique cross-winding process. They are made with a highly magnetic stainless steel flat wrap for greater volume, longer durability and a smooth satin finish.
GHS® PRECISION FLATS™CORDES BASSE FILETS...
M3050
FB45 - FB65 - FB85 - FB105 / 38" Winding GHS Precision Flats™ Bass Strings deliver traditional deep percussive tone due to a unique cross-winding process. They are made with a highly magnetic stainless steel flat wrap for greater volume, longer durability and a smooth satin finish.
GHS® BASS BOOMERS™ CORDES BASSE (5 CORDES)...
M3045-5
045 - 065 - 085 - 105 - 130 / 37.25" Winding GHS Bass Boomers® are one of the most popular bass strings in the world. Utilizing a nickel-plated steel wrap wire (with a special combination of stainless steel and nickel-plate on the low E and B strings) over a hex core, Bass Boomers® have a distinctive low-mid punch that sits well in any musical genre. This...
GHS® BASS BOOMERS™CORDES BASSE MEDIUM 045-105
M3045
045 - 065 - 085 - 105 / 37.25" Winding GHS Bass Boomers® are one of the most popular bass strings in the world. Utilizing a nickel-plated steel wrap wire (with a special combination of stainless steel and nickel-plate on the low E and B strings) over a hex core, Bass Boomers® have a distinctive low-mid punch that sits well in any musical genre. This IS...
GHS® BASS BOOMERS™ CORDES BASSE LIGHT 040-095
L3045
040 - 055 - 075 - 095 / 37.25" Winding GHS Bass Boomers® are one of the most popular bass strings in the world. Utilizing a nickel-plated steel wrap wire (with a special combination of stainless steel and nickel-plate on the low E and B strings) over a hex core, Bass Boomers® have a distinctive low-mid punch that sits well in any musical genre. This IS...
GHS® BASS BOOMERS™ CORDES BASSE LONG...
M3045X
045 - 065 - 085 - 105 / 38" Winding GHS Bass Boomers® are one of the most popular bass strings in the world. Utilizing a nickel-plated steel wrap wire (with a special combination of stainless steel and nickel-plate on the low E and B strings) over a hex core, Bass Boomers® have a distinctive low-mid punch that sits well in any musical genre. This IS your...
GHS® BASS BOOMERS™ CORDES BASSE DIAPASON...
3035
050 - 070 - 090 - 107 / 32.75" Winding GHS Bass Boomers® are one of the most popular bass strings in the world. Utilizing a nickel-plated steel wrap wire (with a special combination of stainless steel and nickel-plate on the low E and B strings) over a hex core, Bass Boomers® have a distinctive low-mid punch that sits well in any musical genre. This IS...
GHS® BASS BOOMERS™ CORDES BASSE HEAVY 050-115
H3045
050 - 070 - 095 - 115 / 37.25" Winding GHS Bass Boomers® are one of the most popular bass strings in the world. Utilizing a nickel-plated steel wrap wire (with a special combination of stainless steel and nickel-plate on the low E and B strings) over a hex core, Bass Boomers® have a distinctive low-mid punch that sits well in any musical genre. This IS...
GHS® PRECISION FLATS™ CORDES BASSE FILET...
3050
FB55 - FB70 - FB90 - FB105 / 38" Winding GHS Precision Flats™ Bass Strings deliver traditional deep percussive tone due to a unique cross-winding process. They are made with a highly magnetic stainless steel flat wrap for greater volume, longer durability and a smooth satin finish.
GHS® BASS BOOMERS™ CORDES BASSE ACCORDAGE...
4M-B-DYB
065 - 085 - 105 - 130 / 37.25" Winding Tuning a 4 String Bass BEAD (or, the lower 4 strings of a 5 string bass) is not a new development. However, players had to either purchase strings separately or a 5 string set and throw away the G string to be able to do this. With the BEAD Tuned Bass Boomers® sets from GHS Strings, players can now buy the exact sets...
GHS® PRESSUREWOUND™ CORDES BASSE MEDIUM...
M7200
044 - 062 - 084 - 106 / 37.25" Winding Pressurewounds strike the perfect balance between aggressive and smooth, with less finger noise. Wound over a hex core wire, a highly magnetic nickel-iron alloy (Alloy 52™) is run through precision rollers, slightly flattening the final wrap. The result is a string with incredible articulation that can run the gamut...
GHS® PRESSUREWOUND™ CORDES BASSE BRONZE...
4L-RBB
042 - 054 - 074 - 092 / 37.25" Winding GHS Pressurewound Bronze strings are an exciting development for acoustic basses. The final cover is run through precision rollers during the winding process, slightly flattening the wrap. This process results in the first phosphor bronze bass string that does not have harsh and abrasive overtones and finger noise,...
GHS® PRESSUREWOUND™ CORDES BASSE MEDIUM...
ML7200
044 - 058 - 080 - 102 / 37.25" Winding Pressurewounds strike the perfect balance between aggressive and smooth, with less finger noise. Wound over a hex core wire, a highly magnetic nickel-iron alloy (Alloy 52™) is run through precision rollers, slightly flattening the final wrap. The result is a string with incredible articulation that can run the gamut...
