FENDER® PICKUP HEIGHT FOAM STRIP 9/16 x 1/2 NEOPRENE (2pcs)

FENDER® VINTAGE-STYLE GUITAR FRET WIRE (24pcs)

0992014000

Fender® vintage-style guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 7.25". Measurements: .045" tall, .083" wide. Cut for guitar fingerboards. Dimensions 0.75x6.00x5.00 IN Poids 0.20 LB

FENDER® VINTAGE-STYLE BASS REPLACEMENT FRETS (24pcs)

0992015000

Fender® vintage-style bass fret wire is pre-cut in 24-piece quantities pre-radiused to 7.25". Measurements: .045" tall, .083" wide. Each piece is approximately 2.375" long. Dimensions 0.25x4.50x5.50 IN Poids 0.20 LB

FENDER® VINTAGE-STYLE THUMB-REST FOR PRECISION BASS® AND JAZZ BASS®

0992036000

Fender® vintage-style thumb rest comes with a template and mounting screws for proper placement. Dimensions 0.70x6.15x11.45 IN Poids 0.04 LB

FENDER® PICKUP MOUNTING TUBING (12pcs)

0994916000

Genuine Fender® pickup tubing is ideal for mounting new pickups just right and for replacing pickup springs or older tubing. Package includes 12 pieces of rubber tubing. Used with most Fender instruments with pickguard-mounting pickups. Dimensions 0.75x2.00x4.00 IN Poids 0.20 LB

FENDER® AMERICAN SERIES STRATOCASTER® TREMOLO ARM TENSION SPRINGS (12pcs)

0994931000

This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic,...

FENDER® TRUSS ROD NUT 1/8” HEX AMERICAN SERIES GUITARS (10-32 INCH THREAD)

0994943000

To help keep the neck of your contemporary electric guitar or bass straight and true, Fender® offers genuine American series truss rod nuts that fit most modern instruments. Package includes one American Standard truss rod nut. 1/8" hex adjustment. Used on American Standard, American Deluxe and some Custom Shop guitars. Dimensions 0.75x2.00x4.00 IN Poids...

FENDER® BI-FLEX™ TRUSS ROD CAVITY PLUGS (2pcs)

0027932049

Affordable genuine Fender® replacement parts for your guitar or bass. Package contains two walnut dowels used to plug the Bi-Flex™ truss rod cavity on the headstock of most American and American Deluxe Series guitars. Note: Plugs are drilled and grooved, but may require modification for proper fit

FENDER® BOLT, MICRO TILT NECK ADJUST, 1/4-28X1-9/16, NICKEL (1pc)

0012156049

FENDER® BOLT, MICRO TILT NECK ADJUST, 1/4-28X1-9/16, NICKEL (1)

FENDER® NECK TILT ADJUST SCREW, AM SERIES, 1/4-20X3/8, HEX, NICKEL, EACH

0031571049

FENDER® NECK TILT ADJUST SCREW, AM SERIES, 1/4-20X3/8, HEX, NICKEL, EACH

FENDER® ALUMINUM PICKGUARD SHIELDING FOR AMERICAN VINTAGE '57 STRATOCASTER

0019640049

Cet authentique blindage fin en aluminium de Fender ne nécessite aucun câblage supplémentaire. Il s'installe sous la plaque de protection de votre Stratocaster et aide à éliminer les bruits indésirables pendant que vous jouez.

FENDER® BULLET TRUSS ROD NUT 1/8" HEX (10-32 INCH THREAD)

0994945000

To help keep '70s-style electric guitar and bass necks straight and true, Fender® offers genuine “Bullet”-style truss rod nuts. 1/8" hex adjusting head. Used in most '70s era and '70s reissue (US and Mexico) instruments with a headstock adjusting truss rod.

FENDER® VINTAGE-STYLE TRUSS ROD NUT

0994944000

Cet écrou cruciforme pour tige de réglage du manche de style vintage permet de garder le manche des guitares et des basses électriques bien droit. Il est compatible avec les instruments de séries American Vintage et Classic dont la tige de réglage du manche est accessible au niveau du talon.

FENDER® T-HANDLE 1/8" TRUSS ROD WRENCH

7715532049

Véritable clé Allen/hexagonale Bondhus Fender de 3,2 mm (1/8”) pour les tiges de réglage des manches de la plupart des guitares American Series/Standard/Deluxe. 247,6 mm de longueur avec poignée en T.

FENDER® PRECISION BASS PICKUP SHIELD BLANK BRASS

0014290020

Fender Vintage Precision Bass Brass Pickup Grounding Plate. Solid brass. Fits into the body cavity under the pickup. Most installers solder a black wire to the plate and the back of the volume pot. Exactly the same part used on USA Vintage Series Precision Basses.

FENDER® ALUMINUM PICKGUARD SHIELDING FOR '62 STRATOCASTER

0019699049

FENDER® BULLET TRUSS ROD NUT 3/16" HEX

0038443000