Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Corps
- Boutons de commande
- Chevalets & vibratos
- Contrôles & Sélecteurs
- Mécaniques
- Divers
- Visserie
- Manches
- Plaques de protection & plaques arrières
- Capots micros & kits
- Micros & préamplis
- Plaques & capots métal
- Attaches-courroie & security locks
- Guide cordes & sillets
- Manettes de vibrato
- Accessoires
- Pièces d'ampli
- Duesenberg®
- Sandberg®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Déjà vus
-
DUESENBERG® VIBRATO...
DUESENBERG DIAMOND DELUXE TREMOLO...
·Adaptateur de montage sur cordier sans perce supplémentaire vendu séparément : Voir référence MPTM5
The new benchmark for classic tremolo systems - The Duesenberg Diamond Deluxe Tremola.
The Diamond Deluxe gives you best tone while being lightweight.
Heavy duty needle and nylon bearings will give you the famous buttery and highly responsive Duesenberg feel when using the tremolo arm.
The arm can be turned freely for 360°, allows you to set your preferred angle and can be removed within seconds just in case you don't need it sometimes.
The strings are simply guided through the holes in the bar underneath the arm-axis and can be lead to the tuners without any hassle.
The Diamond Deluxe has become a new standard for classic type tremolo systems and proves this on the stages of this world every day.
SCHALLER® STM CHEVALET À ROULEAUX AVEC...
SCHALLER® STM ROLLER BRIDGE WITH ADJUSTABLE SPACING NICKEL
TONEPROS® CHEVALET TUNEOMATIC INSERTS 4mm...
TonePros TP6R provides superior performance on all Bigsby-style tremolo equipped guitars. The TonePros design roller saddles are engineered to allow the strings to roll smoothly, while the TonePros patented system locks the bridge solidly in place allowing for the strings to always return exactly in tune when trem’ed. Bigsby and other tremolo users will...
TONEPROS® CHEVALET TUNEOMATIC INSERTS 6mm...
The TonePros TPFR is a locking Nashville style bridge with flat head saddle adjustment screws, TonePros “Roller” saddles, large posts, and metric thread. The TonePros design roller saddles are engineered to allow the strings to roll smoothly, while the TonePros patented system locks the bridge solidly in place allowing for the strings to always return...
GOLDO® CHEVALET À ROULEAUX PONTETS LAITON...
Especially in combination with tremolo systems, a roller bridge can be worth its weight in gold, as it significantly reduces the risk of possible detuning. The göldo Turnómatic roller bridge comes in a classic vintage design, and the string saddles are provided with small brass rollers over which the strings run. The knurled washers for height adjustment...
ADAPTATEUR DUESENBERG® TDBSN SUR LES PAUL®...
ADAPTATEUR DUESENBERG TDBSN SUR LESPAUL SANS MODIFICATION
ALL PARTS® CHEVALET TELE® MONTAGE BIGSBY...
CHEVALET TELE® POUR MONTAGE BIGSBY® NICKEL + PONTETS GOTOH® IN TUNE / COMPENSATED TELE® BRIDGE ADAPTED FOR BIGSBY® USE WITH GOTOH® IN TUNE SADDLES
GOLDO® DOWNHOLDER BARRE AJUSTEMENT D'ANGLE...
GOLDO DOWNHOLDER NICKEL RETROFIT FOR BIGSBY TYPE TREMOLO (METRIC & US STUDS)
ALL PARTS® PLAQUE DE CHEVALET TELE®...
PLAQUE DE CHEVALET TELE® POUR MONTAGE BIGSBY® NICKEL / TELE® BRIDGE PLATE FOR BIGSBY® USE NICKEL (NO SADDLES)
GOLDO® VIBROBRIDGE CHEVALET TYPE TELE®...
In combination with classic top-mount tremolo systems like Duesenberg Diamond Deluxe, göldo G5, and similar. The bridge itself has all the important vintage features - i.e. steel as the base material and three brass saddles that provide the typical twang. The saddles are also flattened at the bottom to have a larger adjustment range for the height. The...
ALL PARTS® CHEVALET TELE® MONTAGE BIGSBY...
30 autres produits dans la même catégorie
GOLDO® G5 VIBRATO COURT NICKEL
TGD5N
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G5 VIBRATO COURT DORÉ
TGD5G
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G5 VIBRATO COURT ALUMINIUM POLI
TGD5A
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G7 VIBRATO LONG NICKEL
TGD7N
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G7 VIBRATO LONG ALUMINIUM POLI
TGD7A
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
DUESENBERG® VIBRATO LONG RADIATOR ALUMINIUM POLI
TDRLA
DUESENBERG RADIATOR TREMOLO LONG ALU
DUESENBERG® VIBRATO LONG DIAMOND DELUXE ALUMINIUM POLI
TDBLA
DUESENBERG LONG TREMOLO ALU
DUESENBERG® VIBRATO COURT DIAMOND DELUXE ALUMINIUM POLI
TDBSA
*DUESENBERG DIAMOND DELUXE TREMOLO ALU SHORT (FIT MPTM5)
GOLDO® LT1 VIBRATO NICKEL
TLT1N
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT1 VIBRATO DORÉ
TLT1G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT1 VIBRATO CHROME
TLT1C
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT2 VIBRATO NICKEL
TLT2N
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® LT2 VIBRATO DORÉ
TLT2G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® LT2 VIBRATO CHROME
TLT2C
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® DG VIBRATO POUR JAZZMASTER® OU JAGUAR® NICKEL / CHROME
TDG1JM
The göldo tremolo for offset guitars is not a copy of the Fender® system, but can replace it without milling, drilling and modifications. It offers all the advantages of the new göldo DG1 tremolo series: butter-smooth movement in "up & down" operation and an in all dimensions settable and elegantly shaped tremolo arm with safe, adjustable zero point....
GOLDO® DG VIBRATO SHORTY DESIGN NICKEL
TDG1ST
DG tremolo system in an ultra-small design and all the advantages of the göldo DG series: butter-smooth operation in "up & down" modes and an elegantly shaped round tremolo arm with safe, settable zero point, adjustable in all dimensions. A true alternative! Including the screws for mounting the base plate. With round tremolo arm. Required routing...
GOLDO® DG VIBRATO COURT GUITARE SEMI-ACOUSTIQUE NICKEL
TDG1HS
DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...
GOLDO® DG VIBRATO LONG GUITARE SEMI-ACOUSTIQUE NICKEL
TDG1HL
DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...
GOLDO® LT1 VIBRATO SATIN CHROME
TLT1S
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT1 VIBRATO NOIR
TLT1B
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® G5 VIBRATO COURT NOIR
TGD5B
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® DOWNHOLDER BARRE AJUSTEMENT D'ANGLE DE CORDES VIBRATOS BIGSBY® NICKEL
TGDDH
GOLDO DOWNHOLDER NICKEL RETROFIT FOR BIGSBY TYPE TREMOLO (METRIC & US STUDS)
DUESENBERG® VIBRATO LONG DIAMOND DELUXE GAUCHER NICKEL
TDBLLN
*DUESENBERG LONG TREMOLO NICKEL LEFT HAND
DUESENBERG® VIBRATO LONG RADIATOR GAUCHER DORÉ
TDRLLG
*DUESENBERG RADIATOR TREMOLO LONG GOLD LEFT HAND
DUESENBERG® VIBRATO LONG RADIATOR GAUCHER NICKEL
TDRLLN
*DUESENBERG RADIATOR TREMOLO LONG NICKEL LEFT HAND
DUESENBERG® LES TREM II VIBRATO GAUCHER NICKEL
TM85LN
DUESENBERG "LESTREM II " TREMOLO NICKEL LEFT HAND
DUESENBERG® LES TREM II VIBRATO GAUCHER DORÉ
TM85LG
DUESENBERG "LESTREM II " TREMOLO GOLD LEFT HAND
DUESENBERG® VIBRATO LONG RADIATOR GAUCHER ALUMINIUM POLI
TDRLLA
*DUESENBERG RADIATOR TREMOLO LONG ALU LEFT HAND
DUESENBERG® VIBRATO COURT DIAMOND DELUXE GAUCHER NICKEL
TDBSLN
*DUESENBERG DIAMOND DELUXE TREMOLO NICKEL SHORT LEFT HAND
GOLDO® LT1 VIBRATO GAUCHER DORÉ
TLT1LG
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
