Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Corps
- Boutons de commande
- Chevalets & vibratos
- Contrôles & Sélecteurs
- Mécaniques
- Divers
- Visserie
- Manches
- Plaques de protection & plaques arrières
- Capots micros & kits
- Micros & préamplis
- Plaques & capots métal
- Attaches-courroie & security locks
- Guide cordes & sillets
- Manettes de vibrato
- Accessoires
- Pièces d'ampli
- Duesenberg®
- Sandberg®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Déjà vus
-
GOLDO® LT1 VIBRATO NICKEL
Licensed by Duesenberg - Mounted in...
GOLDO® LT1 VIBRATO NICKEL
105,00 €TTC
(prix public conseillé)
TLT1N
·Fourni avec Inserts US et Métriques
·Entre-Axes des Inserts : 81.5mm
Licensed by Duesenberg®
Can simply be swapped for a stop tailpiece.
No drilling, no milling necessary.
The tremolo is attached to the two threaded tailpiece bushings with the supplied screws.
The round arm can be adjusted in angle and length to easily find the preferred personal setting.
Incl. metric and US screws, matching hex keys and an 8mm open-end wrench for the tremolo arm nut.
The distance between the tailpiece studs should be 81.5 mm, measured from center to center.
30 autres produits dans la même catégorie
DUESENBERG® VIBRATO LONG DIAMOND DELUXE DORÉ
TDBLG
*DUESENBERG LONG TREMOLO GOLD
GOLDO® G5 VIBRATO COURT NICKEL
TGD5N
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G5 VIBRATO COURT DORÉ
TGD5G
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G5 VIBRATO COURT ALUMINIUM POLI
TGD5A
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G7 VIBRATO LONG NICKEL
TGD7N
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® G7 VIBRATO LONG ALUMINIUM POLI
TGD7A
Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
DUESENBERG® VIBRATO LONG RADIATOR...
TDRLA
DUESENBERG RADIATOR TREMOLO LONG ALU
DUESENBERG® VIBRATO LONG DIAMOND DELUXE...
TDBLA
DUESENBERG LONG TREMOLO ALU
DUESENBERG® VIBRATO COURT DIAMOND DELUXE...
TDBSA
*DUESENBERG DIAMOND DELUXE TREMOLO ALU SHORT (FIT MPTM5)
GOLDO® LT1 VIBRATO DORÉ
TLT1G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT1 VIBRATO CHROME
TLT1C
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT2 VIBRATO NICKEL
TLT2N
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® LT2 VIBRATO DORÉ
TLT2G
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® LT2 VIBRATO CHROME
TLT2C
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...
GOLDO® DG VIBRATO POUR JAZZMASTER® OU...
TDG1JM
The göldo tremolo for offset guitars is not a copy of the Fender® system, but can replace it without milling, drilling and modifications. It offers all the advantages of the new göldo DG1 tremolo series: butter-smooth movement in "up & down" operation and an in all dimensions settable and elegantly shaped tremolo arm with safe, adjustable zero point....
GOLDO® DG VIBRATO SHORTY DESIGN NICKEL
TDG1ST
DG tremolo system in an ultra-small design and all the advantages of the göldo DG series: butter-smooth operation in "up & down" modes and an elegantly shaped round tremolo arm with safe, settable zero point, adjustable in all dimensions. A true alternative! Including the screws for mounting the base plate. With round tremolo arm. Required routing...
GOLDO® DG VIBRATO COURT GUITARE...
TDG1HS
DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...
GOLDO® DG VIBRATO LONG GUITARE...
TDG1HL
DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...
GOLDO® LT1 VIBRATO SATIN CHROME
TLT1S
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® LT1 VIBRATO NOIR
TLT1B
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
GOLDO® G5 VIBRATO COURT NOIR
TGD5B
Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...
GOLDO® DOWNHOLDER BARRE AJUSTEMENT D'ANGLE...
TGDDH
GOLDO DOWNHOLDER NICKEL RETROFIT FOR BIGSBY TYPE TREMOLO (METRIC & US STUDS)
DUESENBERG® VIBRATO LONG DIAMOND DELUXE...
TDBLLN
*DUESENBERG LONG TREMOLO NICKEL LEFT HAND
DUESENBERG® VIBRATO LONG RADIATOR GAUCHER...
TDRLLG
*DUESENBERG RADIATOR TREMOLO LONG GOLD LEFT HAND
DUESENBERG® VIBRATO LONG RADIATOR GAUCHER...
TDRLLN
*DUESENBERG RADIATOR TREMOLO LONG NICKEL LEFT HAND
DUESENBERG® LES TREM II VIBRATO GAUCHER...
TM85LN
DUESENBERG "LESTREM II " TREMOLO NICKEL LEFT HAND
DUESENBERG® LES TREM II VIBRATO GAUCHER DORÉ
TM85LG
DUESENBERG "LESTREM II " TREMOLO GOLD LEFT HAND
DUESENBERG® VIBRATO LONG RADIATOR GAUCHER...
TDRLLA
*DUESENBERG RADIATOR TREMOLO LONG ALU LEFT HAND
DUESENBERG® VIBRATO COURT DIAMOND DELUXE...
TDBSLN
*DUESENBERG DIAMOND DELUXE TREMOLO NICKEL SHORT LEFT HAND
GOLDO® LT1 VIBRATO GAUCHER DORÉ
TLT1LG
Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...
