Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Duesenberg®
- Sandberg®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Déjà vus
-
FRATERMUSIC® GABARIT...
FRATER ROUTING TEMPLATE TELE BRIDGE...
FRATERMUSIC® GABARIT DE DÉFONCE MICRO CHEVALET TELE®
RTT04
12,80 €TTC
(prix public conseillé)
WD MUSIC® FRAISE À COPIER POUR GABARITS...
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4 in. per pass. Bit diameter = 3/8 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4 in. per pass. Bit diameter = 3/8 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4 in. per pass. Bit diameter = 3/8 in. Bit shaft diameter = 1/4 in.
WD MUSIC® FRAISE À COPIER POUR GABARITS...
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.
30 autres produits dans la même catégorie
G&W ADAPTATEUR DEFONCEUSE POUR DREMEL®
GW-EG20
RIVIERA® GABARIT DE DÉFONCE PONTETS INDIVIDUELS BASSE
RBBS-T
RIVIERA® GABARIT DE DÉFONCE VIBRATO GUITARE
RTS10-T
GOLDO® FRAISE 10mm
WS10S
TRIPLE EDGE COUNTERSINK (10mm)
GOLDO® FRAISE 8.3mm
WS83S
TRIPLE EDGE COUNTERSINK (8,3mm)
GOLDO® FRAISE 6.3mm
WS63S
TRIPLE EDGE COUNTERSINK (6,3mm)
FRATERMUSIC® GABARIT DE DÉFONCE SÉLECTEUR 3-4-5 POSITION TYPE FENDER®
RTT10
FRATER ROUTING TEMPLATE LEVER SWITCH
FRATERMUSIC® GABARIT DE DÉFONCE MICRO PRECISION BASS®
RTT06
FRATER ROUTING TEMPLATE PRECISION PICKUP
FRATERMUSIC® GABARIT DE DÉFONCE MICRO P90
RTT05
FRATER ROUTING TEMPLATE P90 PICKUP
FRATERMUSIC® GABARIT DE DÉFONCE DE PLAQUE MICRO MANCHE TELE®
RTT03
FRATER ROUTING TEMPLATE TELE NECK PICKUP FOR PICKGUARDS
FRATERMUSIC® GABARIT FERRULE MI- MI 52mm
BUSH-TEMP52
FRATER BUSHING TEMPLATE E/A 52mm
HOSCO® FORET ÉTAGÉ 7.8mm / 9.9mm HSS POUR MÉCANIQUES À BAIN D'HUILE
TL-DB2-7899
*HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)
WD MUSIC® FRAISE À COPIER POUR GABARITS PROFONDEUR 3/4 inch
BIT-3/8-OD
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4 in. per pass. Bit diameter = 3/8 in. Bit shaft diameter = 1/4 in.
FRATERMUSIC® GABARIT DE DÉFONCE MICRO MANCHE JAZZ BASS®
RTT08
FRATER ROUTING TEMPLATE JASS BASS NECK PICKUP
FRATERMUSIC® GABARIT DE DÉFONCE MICRO CHEVALET JAZZ BASS®
RTT07
FRATER ROUTING TEMPLATE JASS BASS BRIDGE PICKUP
FRATERMUSIC® GABARIT DE DÉFONCE MICRO SIMPLE
RTT11
FRATER ROUTING TEMPLATE SINGLE STRAT PICKUP
FRATERMUSIC® GABARIT DE DÉFONCE MICRO PAVÉ TYPE MUSICMAN®
RTT13
FRATER ROUTING TEMPLATE MUSICMAN PICKUP
FRATERMUSIC® GABARIT DE DÉFONCE MICRO TYPE TV JONES®
RTT12
FRATER ROUTING TEMPLATE TV JONES PICKUP
FRATERMUSIC® GABARIT FERRULE MI- MI 54mm
BUSH-TEMP54
FRATER BUSHING TEMPLATE E/A 54mm
FRATERMUSIC® GABARIT DE DÉFONCE CAVITÉE ÉLECTRONIQUE TELECASTER®
RTT14
FRATER ROUTING TEMPLATE TELE CAVITY CONTROL
WD MUSIC® FRAISE À COPIER POUR GABARITS PROFONDEUR 3/8 inch
BIT-3/8
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.
FRATERMUSIC® GABARIT DE DÉFONCE AVANT ET ARRIÈRE DE FLOYDROSE®
RTT15
FRATER ROUTING TEMPLATE FLOYD ROSE© (2 PIECES)
FRATERMUSIC® GABARIT DE DÉFONCE DE PLAQUE MICRO DOUBLE BOBINAGE
RTT16
FRATER ROUTING TEMPLATE HUMBUCKER PICKGARDS
ALL PARTS® ALÉSOIR MÉCANIQUES BASSE 6.33mm À 22.65mm
LT-0825-000
G&W MÈCHE POUR FRAISAGE DE PERÇAGES
GW-TH-CC
G&W ADAPTATEUR POUR MÈCHE À DÉFONCEUSE 8mm - 6.35mm
GW-CH1-8-6.35
G&W GABARIT DE PERÇAGE POUR MÉCANIQUES GUITARE ÉLECTRIQUE 6x1
GW-TDJ1
G&W TUNER DRILLING JIG FOR ELECTRIC 6x1Made of Aluminium, with a black anodized finish.- 6 Holes for the tuners and 7 for the screws,- Centerline guide on each side (in order to keep everything really aligned)- Package includes 2 screws (picture 3)Manufactured at G&W.
G&W GABARIT DE PERÇAGE POUR MÉCANIQUES GUITARE ACOUSTIQUE
GW-TDJ-A
G&W GABARIT DE PERÇAGE POUR MÉCANIQUES GUITARE CLASSIQUE
GW-TDJ-C
G&W GUIDE DE PERÇAGE POUR MÉCANIQUES
GW-UTPL
G&W ADAPTATEUR DEFONCEUSE POUR DREMEL®
GW-EG20
RIVIERA® GABARIT DE DÉFONCE PONTETS INDIVIDUELS BASSE
RBBS-T
RIVIERA® GABARIT DE DÉFONCE VIBRATO GUITARE
RTS10-T
GOLDO® FRAISE 10mm
WS10S
TRIPLE EDGE COUNTERSINK (10mm)
GOLDO® FRAISE 8.3mm
WS83S
TRIPLE EDGE COUNTERSINK (8,3mm)
GOLDO® FRAISE 6.3mm
WS63S
TRIPLE EDGE COUNTERSINK (6,3mm)
