HOSCO® PINCE EXTRACTION DE FRETTES

SUMMIT® PINCE À FRETTES POUR BORD DE TOUCHE

SUM8001

SUMMIT STRAIGHT OVERHANG FRET-END CUTTER SUMMIT frettes cutter pour bord de touche.

SUMMIT® PINCE À FRETTES AVEC MARTEAU

SUM8004

SUMMIT fret cutter with hammer SUMMIT frettes cutter avec marteau

SUMMIT® LOT DE CALES OUTILS DE FRETTAGE (FONCTIONNE AVEC SUM8009 & SUM8010)

SUM80101

SUMMIT BASIC SET CAULS FOR PRESS-DEVICE (item: 8009 or 8010) flat, 7.1/4'", 12",16" SUMMIT, lot de câles à radius pour presse (article 8009 ou 8010) flat, 7.1/4'", 12",16"

SUMMIT® CALE À RADIUS 20" (FONCTIONNE AVEC SUM8009 ET SUM8010)

SUM80109

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 20" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 20"

SUMMIT® CALE À RADIUS 14" (FONCTIONNE AVEC SUM8009 ET SUM8010)

SUM80107

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 14" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 14"

SUMMIT® CALE À RADIUS 9.5" (FONCTIONNE AVEC SUM8009 & SUM8010)

SUM80104

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 9,5" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 9,5"

SUMMIT® CALE À RADIUS 10" (FONCTIONNE AVEC SUM8009 & SUM8010)

SUM80105

SUMMIT CAUL FOR PRESS-DEVICE (item: 8009 or 8010) 10" SUMMIT, câle à radius pour presse (article 8009 ou 8010) 10"

FRATERMUSIC® RÈGLE À ENCOCHES STRAT®/TELE®/LES PAUL® (24.75" + 25.5")

NS-EDGE

FRATER NOTCHED STRAIGHT EDGE FOR STRAT®/TELE®/LESPAUL® (24.75" + 25.5")

SUMMIT® LIME À FRETTES (FONCTIONNE AVEC SUM8067)

SUM8068

SUMMIT FRET BEVELING FILE (works with item: 8067)

SUMMIT® SUPPORT POUR LIME À FRETTES 35°/90° SANS LIME (FONCTIONNE AVEC SUM8068)

SUM8067

SUMMIT HANDLE FRET BEVELER DOUBLE ANGLED 35°/90° WITHOUT FILE (NEED SUM8068)

SUMMIT® BANDE DE PROTECTION TEFLON, 5m

SUM8064

SUMMIT TEFLON TAPE-FRET PROTECTIVE, 5 METERS

HOSCO® LIME DE PLANIMÉTRIE (160 x 28 x 5mm)

TL-FL160S

HOSCO FRET LEVELING FILE (160 x 28 x 5mm)

FRATERMUSIC® RÈGLE À ENCOCHES BASSE (34"+35")

NS-EDGE-BASS

FRATER NOTCHED STRAIGHT EDGE FOR BASS (34"+35")

HOSCO® CALE À RADIUS BOIS 15" ET 20" (84 x 150mm)

TWSB-4

RADIUS BLOCK 84 x 150mm RADIUS 15" & 20"

HOSCO® PINCE PIED DE FRETTE MEDIUM

H-FTN-M

HOSCO® FRET TANG NIPPER FOR MEDIUM FRETS LENGTH : 170mm WEIGHT : 250g DOES NOT CUT STAINLESS STEEL FRETS

HOSCO® LIME À FRETTES COMPACTE 2 GRAINS / FRETTES JUMBO (3mm)

H-FF3

HOSCO® COMPACT FRET CROWN FILE WITH COARSE AND FINE CUTS FOR JUMBO FRETS (3mm) -File size : 100 x 20 x 4mm (without silicone rubber grip) -Embossed triangle marks shows coarse-cut and fine-cut sides -Red silicon rubber grip

HOSCO® LIME À FRETTES COMPACTE 2 GRAINS / FRETTES MEDIUM (2mm)

H-FF2

HOSCO® COMPACT FRET CROWN FILE WITH COARSE AND FINE CUTS FOR MEDIUM FRETS (2mm) -File size : 100 x 20 x 4mm (without silicone rubber grip) -Embossed triangle marks shows coarse-cut and fine-cut sides -Yellow silicon rubber grip

HOSCO® LIME À FRETTES COMPACTE 2 GRAINS / FRETTES FINES (1mm)

H-FF1

HOSCO® COMPACT FRET CROWN FILE WITH COARSE AND FINE CUTS FOR SMALL FRETS (1mm) -File size : 100 x 20 x 4mm (without silicone rubber grip) -Embossed triangle marks shows coarse-cut and fine-cut sides -Blue silicon rubber grip

HOSCO® KEIBA® PINCE POUR FRETTES INOX 210 x 16mm

TL-FC28S

KEIBA® FRET CUTTER FOR STAINLESS STEEL

SUMMIT® CALE PLANIMÉTRIE ALUMINIUM 600mm

SUM8043

SUMMIT ALUMINIUM FRET LEVELER 600mm Technical data - Length 600 mm - Precise fingerboard sanding and fret leveling - From hardened anodized aluminum alloy Advantages - Beveled edges under 45° to assure equal sanding over the flat working surface. - Ends closed with rubbered plastic covers to prevent damage from tool ends - Keep sanding resin from entering...

SUMMIT® CALE PLANIMÉTRIE ALUMINIUM 400mm

SUM8042

SUMMIT ALUMINIUM FRET LEVELER 400mm Technical data - Length 400 mm - Precise fingerboard sanding and fret leveling - From hardened anodized aluminum alloy Advantages - Beveled edges under 45° to assure equal sanding over the flat working surface. - Ends closed with rubbered plastic covers to prevent damage from tool ends - Keep sanding resin from entering...

SUMMIT® MARTEAU À FRETTAGE

SUM801327

Technical data - Diameter 27 mm, weight 0,22 kg - Double surface white softer material - Yellow harder material Advantages - Double-functional: combination of hard and flexible surface - For standard installing and partial harder hammering, when needed

SUMMIT® OUTIL DE MESURE HAUTEUR FRETTES

SUM8046

Technical data -Stainless steel 1,5mm thick - Dim100x52x1,5mm. Advantages - Two in one: high fret detector + action gauge - Handy reference: actions for electric, classical, acoustic and bass guitars - Hole for easy storage.

THOMAS FLINN® PAX SCIE DE FRETTAGE 0.53mm

TF-PGUI

G&W LIME PLANIMÉTRIE DOUBLE FACE 70mm

GW-1141070

G&W LIME PLANIMÉTRIE DOUBLE FACE 100mm

GW-1141100