Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Duesenberg®
- Sandberg®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Déjà vus
-
JESCAR® FRETTES 18%...
JESCAR® FRETWIRE 18% NICKEL SILVER...
JESCAR® FRETTES 18% NICKEL SILVER 2.03x1.09mm ROULEAU (0.45Kg)
FW43080
91,00 €TTC
(prix public conseillé)
The most popular size for acoustic guitars. Standard issue on Martin® guitars and Fender® vintage size.
HOSCO® PINCE PIED DE FRETTE MEDIUM
HOSCO® FRET TANG NIPPER FOR MEDIUM FRETS LENGTH : 170mm WEIGHT : 250g DOES NOT CUT STAINLESS STEEL FRETS
HOSCO® KEIBA® PINCE POUR FRETTES INOX 210...
KEIBA® FRET CUTTER FOR STAINLESS STEEL
SUMMIT® MARTEAU À FRETTAGE
Technical data - Diameter 27 mm, weight 0,22 kg - Double surface white softer material - Yellow harder material Advantages - Double-functional: combination of hard and flexible surface - For standard installing and partial harder hammering, when needed
HOSCO® PINCE À AFFLEURER POUR FRETTES...
HOSCO FRET CUTTER (NOT FOR STAINLESS STEEL) 190mm LONG x 26 mm WIDTH
HOSCO® LIME POUR ARRONDIS DE BORDS DE...
HOSCO LIME A FRET AV MANCHE MEDIUM (R 2mm) FOR FRET END (JAPAN)
HOSCO® LIME POUR ARRONDIS DE BORDS DE...
HOSCO LIME A FRET AV MANCHE MEDIUM (R 3mm) FOR FRET END (JAPAN)
HOSCO® LIME À FRETTE MEDIUM
HOSCO LIME FRET FILE MEDIUM
HOSCO® LIME À FRETTE JUMBO
HOSCO LIME FRET FILE LARGE
HOSCO® LIME À FRETTE DIAMANT 3 TAILLES P600
HOSCO® 3 IN 1 DIAMOND FRET CROWN FILE 600 GRIT -File length: 130mm -Total length: 230mm -3 different (small, medium, large) radiuses in one file : This fret crown file has three different radiuses in one file. It can be used according to type of fret crown. Small standard (R=1mm) Medium standard (R=2mm) Jumbo (R=3mm)
HOSCO® MARTEAU DE FRETTAGE FACES ACIER /...
HOSCO HAMMER / MARTEAU DOUBLE STEEL/NYLON 225 GR MANCHE BOIS JAPAN
HOSCO® GOMME DE PONÇAGE FRETTE P150 (2pcs)
GOMME FRET SANDING RUBBER # 150
SINTOMS® CINTREUSE DE FRETTE
SINTOMS® FRET BENDER
HOSCO® GOMME DE POLISSAGE FRETTE P1000 (2pcs)
GOMME FRET POLISHING RUBBER # 1000 (2PCS)
HOSCO® GOMME DE POLISSAGE FRETTE P180 (2pcs)
GOMME FRET POLISHING RUBBER # 180 (2PCS)
HOSCO® GOMME DE POLISSAGE FRETTE P400 (2pcs)
GOMME FRET POLISHING RUBBER # 400 (2PCS)
GOLDO® LIME À FRETTE 3mm
LIME FRET FILE STANDARD
FRATERMUSIC® MINI LIME A FRETTES POIGNÉE...
FRATER MINI LIME A FRET
SUMMIT® PINCE À FRETTES AVEC MARTEAU
SUMMIT fret cutter with hammer SUMMIT frettes cutter avec marteau
SUMMIT® PINCE AJUSTABLE POUR PIED DE FRETTES
SUMMIT FRET TANG CUTTER UNIVERSAL - ADJUSTABLE SUMMIT cutter pour pied de frettes adjustable
HOSCO® LIME DE PLANIMÉTRIE (160 x 28 x 5mm)
HOSCO FRET LEVELING FILE (160 x 28 x 5mm)
HOSCO® PINCE PIED DE FRETTE MEDIUM
HOSCO® FRET TANG NIPPER FOR MEDIUM FRETS LENGTH : 170mm WEIGHT : 250g DOES NOT CUT STAINLESS STEEL FRETS
HOSCO® KEIBA® PINCE POUR FRETTES INOX 210...
KEIBA® FRET CUTTER FOR STAINLESS STEEL
SUMMIT® MARTEAU À FRETTAGE
Technical data - Diameter 27 mm, weight 0,22 kg - Double surface white softer material - Yellow harder material Advantages - Double-functional: combination of hard and flexible surface - For standard installing and partial harder hammering, when needed
HOSCO® PINCE À AFFLEURER POUR FRETTES...
HOSCO FRET CUTTER (NOT FOR STAINLESS STEEL) 190mm LONG x 26 mm WIDTH
HOSCO® LIME POUR ARRONDIS DE BORDS DE...
HOSCO LIME A FRET AV MANCHE MEDIUM (R 2mm) FOR FRET END (JAPAN)
HOSCO® LIME POUR ARRONDIS DE BORDS DE...
HOSCO LIME A FRET AV MANCHE MEDIUM (R 3mm) FOR FRET END (JAPAN)
30 autres produits dans la même catégorie
JESCAR® FRETTES INOX 2.28x1.40mm TIGE DROITE 60cm (3pcs)
FL55090-S
JESCAR® FRETTES INOX 2.28x1.40mm ROULEAU (0.45Kg)
FW55090-S
JESCAR® FRETTES 18% NICKEL SILVER 2.99x1.47mm ROULEAU (0.45Kg)
FW58118
JESCAR® FRETTES 18% NICKEL SILVER 2.79x1.45mm TIGE 7cm RADIUS 10" (25pcs)
FS57110-NS
JESCAR® FRETWIRE 18% NICKEL SILVER 2.79 X 1.40mm (25 PCS SET / 10" RADIUS) The classic Jumbo fret wire as used by PRS® and most of the modern metal guitar manufacturers. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES 18% NICKEL SILVER 2.28x1.40mm TIGE 7cm RADIUS 10" (25pcs)
FS55090-NS
JESCAR® FRETWIRE 18% NICKEL SILVER 2.28 X 1.40mm (25 PCS SET / 10" RADIUS) The classic 6105® as used by Gibson® and Fender® over the years. Tall/narrow electric guitar wire. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES INOX 2.64x1.19mm TIGE 7cm RADIUS 10" (25pcs)
FS47104-S
JESCAR® FRETWIRE STAINLESS STEEL 2.64 X 1.19mm (25 PCS SET / 10" RADIUS) For over 20 years one of the most popular frets for guitars and basses. As used by PRS®, Ernie Ball®, and many others. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES 18% NICKEL SILVER 2.64x1.19mm TIGE 7cm RADIUS 10" (25pcs)
FS47104-NS
JESCAR® FRETWIRE 18% NICKEL SILVER 2.64 X 1.19mm (25 PCS SET / 10" RADIUS) For over 20 years one of the most popular frets for guitars and basses. As used by PRS®, Ernie Ball®, and many others. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES INOX 2.03x1.09mm TIGE 7cm RADIUS 10" (25pcs)
FS43080-S
JESCAR® FRETWIRE STAINLESS STEEL 2.03 X 1.09mm (25 PCS SET / 10" RADIUS) The most popular size for acoustic guitars. Standard issue on Martin® guitars and Fender® vintage size. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES 18% NICKEL SILVER 2.03x1.09mm TIGE 7cm RADIUS 10" (25pcs)
FS43080-NS
JESCAR® FRETWIRE 18% NICKEL SILVER 2.03 X 1.09mm (25 PCS SET / 10" RADIUS) The most popular size for acoustic guitars. Standard issue on Martin® guitars and Fender® vintage size. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES 18% NICKEL SILVER 2.28x1.40mm TIGE DROITE 60cm (3pcs)
FL55090
JESCAR® FRETWIRE 18% NICKEL SILVER 2.28 X 1.40mm (2ft / 60cm STRAIGHT LENGTH) The classic 6105® as used by Gibson® and Fender® over the years. Tall/narrow electric guitar wire.
JESCAR® FRETTES 18% NICKEL SILVER 2.64x1.19mm TIGE DROITE 60cm (3pcs)
FL47104
JESCAR® FRETWIRE 18% NICKEL SILVER 2.64 X 1.19mm (2ft / 60cm STRAIGHT LENGTH) For over 20 years one of the most popular frets for guitars and basses. As used by PRS®, Ernie Ball®, and many others.
JESCAR® FRETTES 18% NICKEL SILVER 2.41x1.19mm TIGE DROITE 60cm (3pcs)
FL47095
JESCAR® FRETWIRE 18% NICKEL SILVER 2.41 X 1.19mm (2ft / 60cm STRAIGHT LENGTH) Popular medium fret wire for electric guitars.
JESCAR® FRETTES 18% NICKEL SILVER 2.54x1.14mm TIGE DROITE 60cm (3pcs)
FL45100
JESCAR® FRETWIRE 18% NICKEL SILVER 2.54 X 1.14mm (2ft / 60cm STRAIGHT LENGTH) A nice low/wide fret wire. Standard issue at the Gibson® Custom Shop.
JESCAR® FRETTES 18% NICKEL SILVER 2.03x1.09mm TIGE DROITE 60cm (3pcs)
FL43080
JESCAR® FRETWIRE 18% NICKEL SILVER 2.03 X 1.09mm (2ft / 60cm STRAIGHT LENGTH) The most popular size for acoustic guitars. Standard issue on Martin® guitars and Fender® vintage size.
JESCAR® FRETTES 18% NICKEL SILVER 2.54x1.30mm TIGE DROITE 60cm (3pcs)
FL51100
JESCAR® FRETWIRE 18% NICKEL SILVER 2.54 X 1.30mm (2ft / 60cm STRAIGHT LENGTH) The perfect electric guitar size for that ’59 LP model. Not too tall, not too wide, but just right.
JESCAR® FRETTES 18% NICKEL SILVER 2.54x1.30mm ROULEAU (0.45Kg)
FW51100
JESCAR® FRETWIRE 18% NICKEL SILVER 2.54 X 1.30mm (1 POUND / 0.45 KG COIL) The perfect electric guitar size for that ’59 LP model. Not too tall, not too wide, but just right.
JESCAR® FRETTES 18% NICKEL SILVER 2.69x0.99mm ROULEAU (0.45Kg)
FW39106-236
JESCAR® FRETWIRE 18% NICKEL SILVER 2.69 X 0.99mm (1 POUND / 0.45 KG COIL) Low and wide fret for that “fretless wonder” feel. Note the extra wide tang width.
JESCAR® FRETTES INOX 2.79x1.45mm TIGE DROITE 60cm (3pcs)
FL57110-S
JESCAR® FRETWIRE STAINLESS STEEL 2.79 X 1.45mm (2ft / 60cm STRAIGHT LENGTH) The classic Jumbo fret wire as used by PRS® and most of the modern metal guitar manufacturers.
JESCAR® FRETTES 18% NICKEL SILVER 2.69x0.99mm TIGE DROITE 60cm (3pcs)
FL39106-236
JESCAR® FRETWIRE 18% NICKEL SILVER 2.69 X 0.99mm (2ft / 60cm STRAIGHT LENGTH) Low and wide fret for that “fretless wonder” feel. Note the extra wide tang width.
JESCAR® FRETTES 18% NICKEL SILVER 1.35x0.94mm TIGE DROITE 60cm (3pcs)
FL37053
JESCAR® FRETWIRE 18% NICKEL SILVER 1.35 X 0.94mm (2ft / 60cm STRAIGHT LENGTH) This small/narrow fret wire is designed for mandolins and vintage banjos.
JESCAR® FRETTES 18% NICKEL SILVER 2.28x1.40mm ROULEAU (0.45Kg)
FW55090
JESCAR® FRETWIRE 18% NICKEL SILVER 2.28 X 1.40mm (1 POUND / 0.45 KG COIL) The classic 6105® as used by Gibson® and Fender® over the years. Tall/narrow electric guitar wire.
JESCAR® FRETTES INOX 2.79x1.45mm ROULEAU (0.45Kg)
FW57110-S
JESCAR® FRETWIRE STAINLESS STEEL 2.79 X 1.45mm (1 POUND / 0.45 KG COIL) The classic Jumbo fret wire as used by PRS® and most of the modern metal guitar manufacturers.
JESCAR® FRETTES 18% NICKEL SILVER 2.79x1.45mm ROULEAU (0.45Kg)
FW57110
JESCAR® FRETWIRE 18% NICKEL SILVER 2.79 X 1.40mm (1 POUND / 0.45 KG COIL) The classic Jumbo fret wire as used by PRS® and most of the modern metal guitar manufacturers.
JESCAR® FRETTES INOX 2.64x1.19mm ROULEAU (0.45Kg)
FW47104-S
JESCAR® FRETWIRE STAINLESS STEEL 2.64 X 1.19mm (1 POUND / 0.45 KG COIL) For over 20 years one of the most popular frets for guitars and basses. As used by PRS®, Ernie Ball®, and many others.
JESCAR® FRETTES 18% NICKEL SILVER 2.64x1.19mm ROULEAU (0.45Kg)
FW47104
JESCAR® FRETWIRE 18% NICKEL SILVER 2.64 X 1.19mm (1 POUND / 0.45 KG COIL) For over 20 years one of the most popular frets for guitars and basses. As used by PRS®, Ernie Ball®, and many others.
JESCAR® FRETTES INOX 2.54x1.30mm TIGE DROITE 60cm (3pcs)
FL51100-S
JESCAR® FRETWIRE STAINLESS STEEL 2.54 X 1.30mm (2ft / 60cm STRAIGHT LENGTH) The perfect electric guitar size for that ’59 LP model. Not too tall, not too wide, but just right.
JESCAR® FRETTES 18% NICKEL SILVER 2.16x1.27mm TIGE DROITE 60cm (3pcs)
FL50085
JESCAR® FRETWIRE 18% NICKEL SILVER 2.16 X 1.27mm (2ft / 60cm STRAIGHT LENGTH) Suitable for electric or acoustic guitars. Slightly smaller than our 55090
JESCAR® FRETTES INOX 2.03x1.09mm ROULEAU (0.45Kg)
FW43080-S
JESCAR® FRETTES INOX 2.54x1.30mm ROULEAU (0.45Kg)
FW51100-S
JESCAR® FRETTES 18% NICKEL SILVER 2.03x0.94mm TIGE DROITE 60cm (3pcs)
FL37080
JESCAR® FRETTES INOX 2.28x1.40mm TIGE DROITE 60cm (3pcs)
FL55090-S
JESCAR® FRETTES INOX 2.28x1.40mm ROULEAU (0.45Kg)
FW55090-S
JESCAR® FRETTES 18% NICKEL SILVER 2.99x1.47mm ROULEAU (0.45Kg)
FW58118
JESCAR® FRETTES 18% NICKEL SILVER 2.79x1.45mm TIGE 7cm RADIUS 10" (25pcs)
FS57110-NS
JESCAR® FRETWIRE 18% NICKEL SILVER 2.79 X 1.40mm (25 PCS SET / 10" RADIUS) The classic Jumbo fret wire as used by PRS® and most of the modern metal guitar manufacturers. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES 18% NICKEL SILVER 2.28x1.40mm TIGE 7cm RADIUS 10" (25pcs)
FS55090-NS
JESCAR® FRETWIRE 18% NICKEL SILVER 2.28 X 1.40mm (25 PCS SET / 10" RADIUS) The classic 6105® as used by Gibson® and Fender® over the years. Tall/narrow electric guitar wire. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
JESCAR® FRETTES INOX 2.64x1.19mm TIGE 7cm RADIUS 10" (25pcs)
FS47104-S
JESCAR® FRETWIRE STAINLESS STEEL 2.64 X 1.19mm (25 PCS SET / 10" RADIUS) For over 20 years one of the most popular frets for guitars and basses. As used by PRS®, Ernie Ball®, and many others. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.
