SCHATTEN® MODEL B COIL WINDING MACHINE KIT(INCL POWER SUPPLY)

450,00 €TTC
(prix public conseillé)

Sur commande uniquement

Référence : ECWKB

Model B winding machine kits are designed to wind coil wire from 38 ga. to 44 gauge or finer. It is a small profile machine fully capable of winding thousands of pickups over its service life.
Everything that you need to assemble a fully working Model B winding machine is provided in this pre-drilled easy to assemble kit. Assembly consists mostly of some soldering work and installation of parts on the machine. Average assembly time is between forty five minutes and one hour. The only things that we don't supply are the simple hand tools and the solder and soldering iron.
Features: Speed control, resettable electronic counter, rotation direction via selector switch, cross Feed limit assembly, outside drive belt for easy replacement, heavy duty ABS enclosure.

Specifications:
- Maximum speed (no load): 1250 rpm
- Average winding speed: up to 900 rpm
- Motor: 9v dc brushed motor, fractional hp
- Power supply furnished with machine: 9 volt 500 milliamp, tip positive.

Accessoires

VINTAGE COIL WIRE 43 GAUGE (ENV 0.071mm- 250GR- 9900 METRES)

Vous devez être connecté à votre compte client

Créer un compte | Création de compte

!! DISCONTINUED !! SCHATTEN® VINTAGE COIL...

This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.

147,60 € (prix public conseillé)

Ajouter au panier

Quick view Détails

ALIMENTATION/ POWER SUPPLY 9 V- 220V FOR ECWB

Vous devez être connecté à votre compte client

Créer un compte | Création de compte

SCHATTEN® ALIMENTATION / POWER SUPPLY 9 V...

220 volt AC to 9 volt DC, 500 milliamp, center positive power supply.

12,96 € (prix public conseillé)

Ajouter au panier

Quick view Détails

30 autres produits dans la même catégorie

STRING SWING* JACK INSTALLATION TOOL FOR HOLLOW BODY OR ACOUSTIC

You must be logged

En stock

STRING SWING® OUTIL INSTALLATION JACK POUR DEMI-CAISSE OU ACOUSTIQUE

CC31

A must-have for guitar luthiers! This tool makes a breeze of the difficult task of installing instrument pickup jacks! The tool can be fed up through the jack installation hole & out through the sound hole. The jack can then be secured to the tool & pulled back through; to bring the jack into its place.

42,00 € (prix public conseillé)

You must be logged

En stock

STRING SWING® OUTIL POUR JACK ET FERRULE

CC18

A must-have for guitar luthiers! This tool offers a quick & easy way to tighten a loose jack plug on any surface-mounted input! Insert tool into jack & use allen wrench (as shown) to tighten the internal set screw. This gives the holding power needed to tighten the retainer nut, without having to go inside of the instrument! Designed to...

42,00 € (prix public conseillé)

FRATERMUSIC® EXTRACTEUR CHEVALET ET INSERT

You must be logged

En stock

FRATERMUSIC® EXTRACTEUR CHEVALET ET INSERT

BRDG-LIFT

FRATER BRIDGE LIFTER / POST EXTRACTOR

20,39 € (prix public conseillé)

BOL MAGNETIQUE POUR VIS ET PIECES METALLIQUES

You must be logged

En stock

BOL MAGNÉTIQUE POUR VIS ET PIÈCES MÉTALLIQUES

MAGTRAY

Rangement magnétique pour petites pièces métalliques tels que des vis, des écrous, etc. Bol aimanté et caoutchouté pour une fixation sans dégâts à différents endroits. Fonctionnalités: - Ø du bol 10,5 cm - Force portante : environ 650g/cm².

25,20 € (prix public conseillé)

HOSCO GROOBAR NUT SLOT ASSIST TOOL FOR GUITARS (SET OF 4)

You must be logged

En stock

HOSCO® GROOBAR™ CÂLES DE RÉGLAGE HAUTEUR SILLET DE TÊTE (Set 4pcs)

H-GB4

HOSCO GROOBAR NUT SLOT ASSIST TOOL FOR GUITARS (SET OF 4) L : 1.07mm (0.042") L : 1.27mm (0.050") M : 1.42mm (0.056") H : 1.65mm (0.065")

42,00 € (prix public conseillé)

You must be logged

En stock

SHINWA® MINI ÉQUERRE 75mm

TL-RU-SQ75

MINI STAINLESS SQUARE / MINI EQUERRE

33,60 € (prix public conseillé)

SEPARATEURS DE CORDES / STRINGS SEPARATORS (2 pcs)

You must be logged

En stock

FRATERMUSIC® SEPARATEURS DE CORDES (2pcs)

STR-SPR

FRATER SEPARATEURS DE CORDES / STRINGS SEPARATORS (2 pcs)

13,20 € (prix public conseillé)

AXMINSTER NON STICK DOWEL et BISCUIT GLUE BRUSH

You must be logged

En stock

AXMINSTER NON STICK DOWEL & BISCUIT GLUE BRUSH (2PCS)

107545

This is a pack of two reusable glue applicators. Ever had trouble getting glue into slots and dowel holes. These double-ended silicone rubber applicators solve the problem. The dowel tip allows you to work the glue into the dowel hole. The biscuit tip tapers to a thin flexible flat end allowing you to apply glue into a biscuit slot with ease. These...

9,48 € (prix public conseillé)

You must be logged

En stock