Rechercher
Déjà vus
GOTOH® BUSHINGS FOR SD91 VINTAGE...
SD91 6X1 CARD SET (6PCS/SET)
SD90 3x3 CARD SET (6PCS/SET)
Allow fitting of traditional vintage tuners into modern 10mm pegholes. Usually, vintage type tuners are being installed into 8.5mm pegholes. These adapters are for everyone who wants to fit vintage tuners into modern 10mm pegholes. Inner diameter: 6.4mm Set of 6 pcs
Allow fitting of traditional vintage tuners into modern 10mm pegholes. Usually, vintage type tuners are being installed into 8.5mm pegholes. These adapters are for everyone who wants to fit vintage tuners into modern 10mm pegholes. Inner diameter: 6.4mm Set of 6 pcs
GOTOH® BUSHINGS FOR SD91 VINTAGE MACHINE HEADS NICKEL (6pcs) -Inner Diameter : 6.5mm -Outer Diameter : 8.8mm
RONDELLE RESSORT METAL GUITARE BLACK (12)
BUSHING BASS NICKEL (4)
ECROU + RONDELLE BLACK (6)
ECROU + RONDELLE CHROME (6)
Sperzel medium locking rod (1 piece)
Sperzel locking knob (1 piece)
Sperzel locking knob (1 piece)
Sperzel locking knob (1 piece)
Sperzel long locking rod (1 piece)
6 X ECROU + RONDELLE METAL POUR MEC.BAIN D'HUILE GOLD
VIS BOUTON BLACK SMALL (6)
VIS BOUTON GOLD LONG (6)
VIS BOUTON BLACK LONG (6)
VIS BOUTON CHROME LONG (6)
The Göldo Staggering Set allows a staggering for tuners with an equal shaft length. This ensures an even angle of the strings going from the saddle to the tuner shafts and an evan pressure on the nut for each individual string. In most cases a use of string trees is not necessary anymore. The Göldo Staggering Set contains nine black washers of different...
RONDELLES GUITAR PLASTIC WHITE (25) + BLACK (25)
Sperzel small locking rod (1 piece)
BUSHING ADAPTER NICKEL (6.35/10.00)
BUSHING ADAPTER GOLD (6.35/10.00)
RONDELLES BASS PLASTIC WHITE (25) + BLACK (25)
PRESS-IN BUSHINGS FOR SCHALLER® (6.1/10mm) GOLD (SET OF 6)
PRESS-IN BUSHINGS FOR SCHALLER® (6.1/10mm) NICKEL (SET OF 6)
VIS CENTRALE BASS TUNER (4)
Plain press-in bushings for vintage tuners. Diameter at the bottom 7.2mm (for 7mm holes) and 10.5mm at the collar. Inner diameter 6.4mm. Height 8mm. Set of 6.
Knurled press-fit bushings for vintage tuners. Press-Fit like regular vintage bushings but with the appearance of a hex nut. Diameter at the bottom 8.8mm, at the top 10mm Inner diameter 6.4mm Height 8mm Set of 6.